The sustainability partner for exporters
Your EU buyers, public authorities and financial institutions are asking you for sustainability data.
Carbon footprint, water footprint, energy consumption, product declarations, and soon the digital product passport… We measure this data, report it in line with the standards and prepare it for verification. Going further, we offer cost-effective solutions that help you improve your ESG performance and support you in accessing financing for your sustainable investments.
- CBAM, Carbon and Water FootprintCarbon and water calculations, CBAM definitive period, water efficiency, decarbonization
- Exporter Knowledge PortalWhat is your buyer asking? LCA, EPD, gap analysis, GRI, TSRS and VSME
- Digital Product PassportESPR readiness, product environmental footprint, material data, pilot passport
- VSME SmartPrepare your VSME report online yourself
- ESG BoostersVerified solutions that improve your ESG performance
- Sustainability FinanceNational and international financing for sustainable investments
Across all our areas of expertise we offer in-depth training + a kick-off workshop, or end-to-end process consulting.

Integrated service
One team from measurement to financing
As the 10k Consortium, we serve exporters in training, consulting, reporting, ESG performance improvement and sustainability finance. Data you collect once works again in your report, your product passport and your loan application.
Measure
CBAM, carbon and water
We calculate emissions and water use at organization, product and facility level, and support you with the monitoring plan, calculation and verification in the CBAM definitive period.
Document
Product declaration, report, passport
We turn the data we measure into the documents your buyers ask for: LCA, EPD, GRI, TSRS and VSME reports, digital product passport data.
Improve
ESG Boosters
Find products, services and verified solutions that will improve your ESG performance and your data, or get your own product’s impact assessed.
Finance
Sustainability finance
We help you access support programs and green loans in Türkiye for your sustainable investments.
We run this chain as one team; on every project the relevant members work to the same work plan.
- 10k DanışmanlıkTraining, consulting, reporting, finance
- SAGENİTCarbon, water, LCA, EPD and PEF calculations
- ESG BoostersESG performance and product assessment
For exporters
Exporter Knowledge Portal
What is being asked in your sector, which question is answered with which document, and our services that are critical for exporting, all in one place: life cycle assessment (LCA), environmental product declarations (EPD), sustainability gap analysis and reporting under GRI, TSRS or VSME.
ESPR · Digital Product Passport
The digital product passport is coming
Durability, reparability, recycled content and environmental footprint information for products entering the EU market will sit in a digital passport. The passport is prepared by the company in the EU, but most of the data will be requested from the manufacturer, that is, the exporter.
- DPP Registry went live
- First mandatory passports: batteries
- Iron and steel, textiles, aluminum, tires, furniture, mattresses
ESG Boosters · member of the 10k Consortium
Verified solutions that improve your ESG performance
ESG Boosters is an international platform that brings together products, services and verified solutions that will improve your ESG performance and your sustainability data. Each solution is assessed with an independent method and receives a grade showing how well its impact is proven.
Today and tomorrow
Dates ahead for companies
Obligations and buyer requests are arriving at the same time. The preparation time is shorter than the calendar suggests.
1 January 2026
CBAM definitive period
EU importers will surrender certificates for embedded emissions.
27 August 2026
Türkiye ETS in force
Emission permits, monitoring and verification for large installations.
27 September 2026
EU green claims rules
Product claims must be based on measured life cycle data.
30 September 2027
First CBAM declaration
First annual declaration and certificate surrender for 2026 imports.
2028 proposal
CBAM may extend to downstream products
Automotive parts, home appliances, fasteners.
Services
Our services for exporters
On each service’s own page you can find its scope, the process map and what we deliver.
Corporate and product carbon footprint, CBAM definitive period consulting, CBAM risk analysis and a decarbonization roadmap including the supply chain.
Most requested
Corporate Carbon Footprint
If public authorities, your customers or financial institutions ask for your organization’s total emissions, this is the calculation you need. We calculate fuel and process emissions (Scope 1), purchased electricity (Scope 2) and indirect emissions from the supply chain to product use (Scope 3) in line with the GHG Protocol and ISO 14064-1.
GHG Protocol · ISO 14064-1
Service page →
Product Carbon Footprint
If your customer asks “what is the carbon of this product?”, the corporate total is not enough. We calculate the kg CO₂e value for one tonne, one square meter or one unit of product in line with ISO 14067, from raw material to factory gate or to end of life.
ISO 14067
Service page →
The definitive period has started
CBAM Definitive Period Consulting
In the CBAM definitive period you need to report your facility’s emission data to your EU customer. We prepare the monitoring plan for your facility, calculate the embedded emissions and stand by you on site during the accredited verifier’s audit.
EU 2023/956
Service page →
CBAM Risk Analysis
Your products may not be covered by CBAM today but may be expected to come into scope. We review your customs tariff codes against the EU’s scope extension proposal and set out how you will be affected and what preparation you need.
EU scope extension proposal
Service page →
Decarbonization Roadmap
Once you know your emissions, the next question is: how do we reduce them? We prepare a five-year plan that covers your own operations and your supply chain (Scope 3) together and ranks the measures by investment, savings and reduction impact.
Scope 1, 2, 3 · 5-year plan
Service page →
Corporate and product water footprint, a water efficiency plan in line with the regulation, and ISO 46001.
First step
Corporate Water Footprint
We measure your facilities’ water withdrawal, consumption and wastewater. We calculate the blue, green and grey water components using ISO 14046 and the Water Footprint Network method, establish the facility water balance and show where the losses are.
ISO 14046 · Water Footprint Network
Service page →
Product Water Footprint
We calculate how much water a product requires from raw material to factory gate. Especially for food, beverage and textile manufacturers using agricultural raw materials, it provides a basis for buyer requests and product claims.
ISO 14046
Service page →
Water Efficiency Plan and Certificate Preparation
For facilities covered by the Water Efficiency Regulation, we prepare the five-year water efficiency plan and get you ready for entry into the Ministry system and for a blue, green or turquoise certificate application.
Water Efficiency Regulation
Service page →
ISO 46001 Water Efficiency Management System
To tie water efficiency to a system rather than to individuals. We adapt the standard’s requirements to your processes through in-depth training and a kick-off workshop. It works on the same structure as your regulatory plan.
ISO 46001
Service page →
The documents EU buyers ask for: life cycle assessment, environmental product declaration, gap analysis and sustainability report.
Life Cycle Assessment (LCA)
We measure all the environmental impacts of your product from raw material to end of life in line with ISO 14040/14044. It is the basis for EPDs, the product carbon footprint and ecodesign decisions.
ISO 14040 · ISO 14044
Service page →
Environmental Product Declaration (EPD)
Declare your product’s environmental performance with a verified, published document. We manage the process from choosing the product category rules to registration with the program operator.
ISO 14025 · EN 15804+A2
Service page →
Sustainability Gap Analysis
See where you stand before you start reporting. We put the reporting standards’ questions to your organization and set out which information is ready, which is missing and which data you need to collect.
ESRS · TSRS · VSME
Service page →
GRI, TSRS (IFRS) and VSME Reporting
We prepare the sustainability report your EU buyer asks for under the standard that suits you: GRI for a comprehensive, internationally recognized report, TSRS for in-scope companies in Türkiye, and VSME for SME suppliers.
GRI · TSRS (IFRS S1/S2) · VSME
Service page →
Readiness for the EU ecodesign regulation and the digital product passport: analysis, data and implementation.
Start here
ESPR and DPP Readiness Analysis
We map your products against the EU’s priority list and timeline and compare the data a passport needs with what you have today.
EU 2024/1781 · 2025–2030 working plan
Service page →
Product Environmental Footprint (PEF)
We calculate the carbon and environmental footprint values that may appear in the passport using life cycle data.
EU PEF · ISO 14040/44 · ISO 14067
Service page →
Material and Supply Chain Data Map
We build a data map so you can collect material composition, recycled content and substance-of-concern information together with your suppliers.
ESPR information requirements
Service page →
Ecodesign and Circularity Assessment
We assess your product for durability, reparability, recyclability and recycled content, and compare design options.
ESPR ecodesign criteria · LCA
Service page →
DPP Data Package and Pilot
We gather the passport data for the pilot product in a standards-aligned package and bring the first passport to life with your service provider.
DPP standards · DPP Registry
Service page →
Where to start with the DPP?
The timeline, priority product groups and the information a passport may contain, on one page.
Timeline · product groups · FAQ
Overview →
VSME Smart and ESG Boosters
Prepare your report yourself; find verified solutions that will improve your ESG performance.
Online
VSME Smart
If you want to prepare your VSME report yourself. You answer the questions step by step and download your report instantly as Word and PDF.
EFRAG VSME · TR + EN
Discover the platform →
Product and Service Assessment
If your product saves energy, water, waste or emissions, we measure its impact, prepare the evidence file and have it assessed with the ESG Boosters method.
A/B grading system · v2
Details →
Verified Solutions
Compare products and services with a known grade and evidence that will improve your ESG performance and your data.
7 products · August 2026 round
Open the directory →
National and international financing for sustainable investments.

Results workshop

Introductory training

Expert work
Our working model
Training + consulting across all our areas of expertise
We work in two ways depending on your needs. A short program if you want to build your own team’s capacity; if you want a complete result by a fixed date, our experts run the entire process.
In-house
In-depth Training + Kick-off Workshop
Your team learns the subject and the method through in-depth training tailored to your organization. On the last day of the workshop we review your own documents together and plan the implementation together. Duration depends on the subject.
- In-depth training tailored to your organization
- Kick-off workshop with your own documents
- Planning together
- Templates and checklists
For organizations that want to build their own capacity.
End-to-end
End-to-End Process Consulting
On top of the training and workshop, our experts manage the entire process. We decide which data is collected and how, check the data collected, and carry out the calculation and reporting ourselves.
- Includes in-depth training + kick-off workshop
- Guidance and checking of data collection
- Calculation and reporting
- Report, templates and delivery
For organizations that want a complete result by a fixed date.
Sectors
A starting point for your sector
If you are not sure which service to start with, start with the ones most requested in your sector.
Iron, steel and metals
Flat and long products, castings and metal parts for the EU.
Construction materials
Cement, ceramics, glass, insulation, aluminum profiles.
Automotive suppliers and home appliances
Downstream products covered by the 2028 CBAM extension proposal.
Food and beverages
Water-intensive processes, retail suppliers.
Textiles and apparel
Suppliers to EU brands.
Municipalities
Local climate action plans and green city investments.
How we work
We get to know you first, then we send a proposal.
There is no price list on the site. Every project is planned per working day according to the organization’s size, products and goals.
Request
You fill in the form and we call you.
15-minute intro call
We listen to your needs by phone or Zoom.
Proposal
Tailored to your organization, valid for two weeks.
Contract and plan
Experts, dates, location and scope in writing.
Project
In-depth training + kick-off workshop or end-to-end process consulting.
Delivery
Report, templates and delivery.
10k Perspective
Latest articles
Regulations, methods and notes from the field.
First Messages from COP31: 1.5°C Is Slipping Away, and Verified Carbon Data Is Now a Key Competitive Factor for Exporters
The UN Climate Change Conference COP31 is taking place in Antalya from 9 to 20 November. Türkiye holds [...]
VSME: Voluntary by Law, Mandatory in Practice?
When the European Union introduced the Corporate Sustainability Reporting Directive (CSRD), it drew a clear line: large [...]
Sustainable Development Goals and ESRS Framework
The Sustainable Development Goals (SDGs) are 17 interlinked global goals established by the United Nations in 2015 [...]
Let’s decide together which service to start with.
A 15-minute call is usually enough to clarify your needs.
